Core Faceplate Supports R4.

Research record

The detail behind
the study.

Source-linked work for this revision. Reported checks describe the stated model or test; physical qualification and applicability to the current retrofit remain separate.

Subfield Core faceplate supports R4

Controlled concept assembly: 62 separate solids. Eight keyed posts attach the two faceplates to the removable mounting tray. The graphite exterior is retained.

Verification: four focused tests passed; 2,506 geometric/export checks passed; 62 valid separate STEP solids; eight station contact checks passed. Native render verification covers 43 visible meshes. Both drawing pages were visually inspected after correcting a dimension-label overlap.

This is not fabrication-ready. Divider retention, rear-carrier attachment, selected electrical parts, wiring, materials, machining details, tolerances, thread design, post stiffness, loads and physical qualification remain unresolved. Lower screws require tray-out preassembly. Nominal removal checks omit the stated removed parts and do not establish human/tool access. The generator record predates the accompanying drawing/render work; its final drawing/render reminder is superseded by these artifacts only.